Gorgeous ceramic wax burners
With a lovely glossy finish
Available in a Set of three or sold individual
Ceramic wax melt/ oil burners
Available in three different colours or multi is one of each colour
Black, beige & white or multi
PLEASE NOTE SET OF THREE WHITE TEMPORARY OUT OF STOCK .
Ceramic Oil Burner With Cut Out Design Which Comes In 3 Assorted Coloured Designs.
8 x 8cm
Please also note: It is essential that an appropriate size tealight is used when operating any of our burners (particularly smaller ones). A larger tealight in a small burner can mean that the naked flame is too close to the bottom of the bowl / dish, and this must be avoided, as it could potentially cause the bowl or dish to overheat and crack. Provided that small tealights are used in small burners, there is no safety issue that we are aware of concerning overheating.
However, please find below some further general advice.
It is important to note that we consider the following points to denote ‘proper and appropriate usage’:
1) Ensure that whilst heat is being applied from below, there is sufficient oil or wax in the glass dish at ALL times. Heating the bowl from below whilst there is no oil/wax in it could cause the bowl or dish to crack, as there is nothing absorbing the heat.
2) Ensure that you use a good quality tealight. Poorer quality tealights with high soot content can impair the heat exchange of your burner.
3) Ensure that the wick on the tealight is kept trimmed and that the flame does not come into direct contact with the bottom of the bowl or dish.
4) Similarly to the point above, you MUST always use an appropriate size tealight for the size of the burner. For example, a small tealight in a large burner may not sufficiently melt the wax. More importantly however, a larger tealight in a small burner can mean that the naked flame is too close to the bottom of the bowl / dish, and this (as stated above) must be avoided, as it can cause the bowl or dish to crack.
5) Never move the oil burner whilst the tealight is lit, or while the wax / oil is hot.
6) Always place your burner on a heatproof and fireproof surface.
7) Never use sharp or metallic objects (such as knives) to remove used wax, as this could scratch or damage the bowl, and potentially weaken it’s structure, risking breakage when next used. We recommend applying a small amount of heat to loosen any solidified wax, and then popping the wax block out of the bowl using gentle pressure and a soft cloth or tissue.
Please note: the above text is intended to be general guidance for using our oil burner products, and is true to the best of our knowledge at the time of writing. The above guidance does not constitute legal advice, and the selling decisions of our customers must be taken solely at one’s own discretion, and fully in conjunction with one’s own research on the subject.
Thank you for your custom and your cooperation in ensuring the safe and appropriate use of our oil burners.